Measures pore water pressure, ground water level and water level in basins.
CPR Water Level Indicator
The CPR is a water level indicator used to measure the depth of water in boreholes, standpipes and wells. Light and compact, it offers an accurate and quick readout of water depth. The CPR is available in a large variety of lengths suitable for all needs. It offers an adjustable sensitivity control with an audible and visual sign.
NIVOLIC WL Water Level Sensor
The NIVOLIC WL vibrating wire hydraulic level sensor is designed to detect water level changes. Combined with a weir, it allows for continuous monitoring of water flow and can be used for assessing the performance of a dam during its filling and operation by monitoring the leakage downstream.
PW Series Vibrating Wire Multi-Level Piezometer
The multi-level vibrating wire piezometer is perfect for measuring pore pressures at various depths beneath a single surface location. It allows for quick and reliable installations because multiple PW-series piezometers are connected to a single communication cable.
The multi-level piezometer provides significant installation advantages in terms of time, resources and cost reduction, while providing quick and reliable readings at various depths.
PW Series Vibrating Wire Piezometer
The PW is a vibrating wire piezometer designed to measure pore-water or other fluid pressure. It is used to monitor engineering works such as hydraulic structures, foundations, dams, embankments, excavations, tunnels and waste repository sites. The PW has a rugged stainless steel body with triple stage water protection. It offers reliable surge protection and a high level of resistance to electrical and radio frequency interference.
CP1 and CP15 Standpipe Piezometer
The CP is a standpipe piezometer used to measure the pore water pressure and the water level in permeable soils within geotechnical applications such as slope stability, dam performance, and embankments. It also measures the effectiveness of ground improvement techniques, the effects of construction on surrounding structures, the drawdown due to dewatering and pump tests, and the seepage through earth structures.
FPC-2 Pneumatic Piezometer
The FPC-2 pneumatic piezometer is designed to measure fluid pressure in the soil and at the interfaces or in the vicinity of structures buried in the ground. The design and the materials (brass or stainless steel) used in the construction of the FPC-2 make it suitable for use in both short- and long-term monitoring programs where ruggedness, stability and reliability are required. FPC-2 pneumatic piezometers are available with low-air or high-air entry filters. Two models are available: FPC-2 for borehole installations and FPC-2D to be pushed into soft soil.
The FOP is a fiber optic piezometer designed to measure pore water or other fluid pressure. It is used to monitor engineering works such as hydraulic structures, foundations, dams, embankments and waste repository sites. It is built with a rugged stainless steel body for harsh environments. Accurate and reliable, it is intrinsically safe and immune to EMI, RFI and lightning.
FOP-MicroPZ Fiber Optic Miniature Piezometer
The FOP-MicroPZ is a fiber optic piezometer used to measure pore-water or other fluid pressure. Like other piezometers, it is used in various applications like tunnels, embankments, excavations, dams, water repository sites and many others. One of the main differentiators of the FOP-MicroPZ is its very small size, enabling it to be used where no other piezometers can go. Moreover, the FOP-MicroPZ has similar and sometimes better performances than traditional piezometers.