Measure inclinations and tilt. Used to evaluate horizontal deformations of soil, piles, columns and buildings.
DIRECT & INVERTED PENDULUM Reading Table
The Pendulum Direct and Inverted is designed to accurately measure the relative internal horizontal displacement of points along a true vertical line. It may be set up for remote readings and automatic data acquisition using a telependulum. Applications include monitoring of movements within dams, dam foundations, nuclear power stations, viaducts and bridge piers.
RxTx Remote Reading Pendulum Station
The RxTx is a remote reading pendulum station used to monitor the relative horizontal and vertical displacements between a direct or inverted pendulum wire and a structure. It optically measures the relative position of a pendulum wire in x, y, and z axis of displacement in dams, foundations and their structures.
PROFIL Digital Inclinometer Probe
The Profil is a digital inclinometer probe used to locate the depth and measure the lateral displacement and deformation of soil, rock and retaining structures. The probe is waterproof and entirely made of stainless steel. It is also used to determine stability of natural or man-made slopes, embankments, dams as well as deformation of sheet pile and diaphragm walls.
GTI-1A Inclinometer casing
The GTI-1A is an inclinometer casing used to house inclinometer probes to measure lateral movements and deformation of soil, rock and structures when installed in near vertical boreholes or settlement, or when installed horizontally in boreholes or trenches. Couplings are assembled with solvent cement and rivets. When accuracy is critical, spiral surveys may be performed on deep installations.
GEO-LOK Inclinometer casing
The GEO-LOK is an inclinometer casing used to house inclinometer probes to measure lateral movements and deformation of soil, rock and structures when installed in near vertical boreholes or settlement, or when installed horizontally in boreholes or trenches. It requires no glue, rivets or shear wires to connect adjacent sections of pipe. Easily disassembled and reused in the event of installation problems, eliminating drill rig stand by time and the cost of replacement casing. Telescopic sections are available.
MuST FBG Mono-Axial Tiltmeter
The inclinometer is an inclination sensor based on fibre Bragg gratings (FBGs). It is designed to measure small variations of angle towards the vertical without the need for temperature compensation by using two FBGs in an innovative push-pull configuration. The sensor total fibre optic design ensures intrinsic immunity to electric sparks and EMI/RFI.
In-Place MEMS Inclinometer Model PISA-M
The in-place MEMS model PISA-M inclinometer is used for continuous and unattended measurements of lateral displacement of soil, rock and structures. It is used as an alternative to the inclinometer readout system for surveying inclinometer casing installations in hard-to-reach or remote locations, and when near real-time data acquisition and alarm systems are required.
Uniaxial Tiltmeter
The Uniaxial Tiltmeter is used for a wide variety of monitoring and measurement applications. Housed in a rugged enclosure, it may be used outoors and in other wet or harsh environments. It is ideal for structural load testing, monitoring of walls and foundation movement, monitoring of natural and man-made structures, as well as machine positioning and control.
